clsrich

When the shuttle is flying in the shuttle, the rolling shuttle and the shuttle will be generated due to improper position of the side support and hanging hedge, the steel pen, the …

(1)Investigation and research, hold a Zhuge Liang meeting. Please attend the appointment and listen to different opinions. (2)Big reasons can be considered from the aspects of peop…

1. Improper fabric process design and configuration (1) Improper selection of the pen number: After the total number of pens is determined, the layout and compression of the finish…

The warp and weft yarns of the fabric located at the edge support are rolled and broken by 1 to 2 pieces, forming a yarn body that is easily broken, and is called a side support de…

A square eye is called a square eye, as shown in Figure 2-70. It is formed by the fact that the tensions of the upper and lower layers of warp yarns are close to equal, so that in …

　　Natural Advanced Technology Company is a supplier of environmentally friendly fiber fabrics in Canada. The company, together with the Canadian National Research Council and the A…

(1) In order to eliminate square eyes and make the cloth surface full and flat, the back beam of the plain weave fabric is about 19-22mm higher than that of the chest beam (P3). Wh…

(1) The position of the rear beam (C28) is too low. After opening, the tension difference between the upper and lower warp yarns is too small. When the weft yarn shrinks, the warp …

　　Thin and breathable plain weave fabrics woven from thinner cotton yarn can be used for curtains or summer clothing. Also called glass yarn. 　　Bari yarn, also known as glass yarn,…